Installation Guide
Tools Needed:
- Chain tension adjustment tool
- Socket wrench set
- Screwdrivers (flat and Phillips)
- Bar and chain oil
- Safety gloves and goggles
Step-by-Step Assembly
- Unpack and Inspect: Remove all packaging materials and inspect chainsaw for any shipping damage.
- Attach Guide Bar: Place guide bar onto mounting studs, ensuring proper alignment with oiling holes.
- Install Chain: Place chain onto guide bar with cutting teeth facing forward in the direction of rotation.
- Adjust Chain Tension: Adjust chain tension according to specifications - chain should snap back when pulled from guide bar.
- Fill Oil Reservoir: Fill bar and chain oil reservoir with recommended oil type before first use.
- Electrical Connection: Connect to a properly grounded 120V, 15A, AC outlet. Use only outdoor-rated extension cords if necessary.
- Test Run: Perform a brief test run in a safe area to ensure proper chain movement and oiling.
Specifications
| Model Series | CMECS610 |
| Type | Electric Chainsaw |
| Color | Black/Orange |
| Guide Bar Length | 16 inches |
| Chain Pitch | 0.325 inches |
| Chain Gauge | 0.050 inches |
| Motor Type | Brushless Electric Motor |
| Motor Power | 15 Amp |
| Voltage Requirements | 120V, 60Hz |
| Oil Capacity | 8.5 oz |
| Weight | 12.5 lbs |
| Sound Level | 98 dB |
| Automatic Oiling | Yes |
Warranty Information
- Full Warranty: 2 years limited warranty
- Motor Warranty: 3 years on electric motor
- Additional Coverage: 90-day satisfaction guarantee
For warranty service, contact Craftsman Customer Service at 1-888-331-4569 or visit Craftsman.com
Key Features
15 Amp Brushless Motor
High-torque brushless motor provides consistent power for cutting through hard and soft woods without the maintenance requirements of gas engines.
Automatic Oiling System
Built-in automatic oiling system continuously lubricates the chain and bar during operation, reducing friction and extending chain life.
Tool-Free Chain Tensioning
Easy-access dial allows for quick chain tension adjustments without additional tools, ensuring optimal cutting performance and safety.
Low-Kickback Design
16-inch low-kickback bar and chain reduce the risk of dangerous kickback incidents during operation.
Wrap-Around Handle
Ergonomic wrap-around handle provides better control and reduces user fatigue during extended cutting sessions.
Electric Start Convenience
Instant electric start eliminates pull cords and carburetor issues associated with gas-powered chainsaws.
Safety Features Explained
Chain Brake
Inertia-activated chain brake stops chain rotation within milliseconds if kickback occurs
Hand Guard
Front hand guard protects operator's hand from debris and broken chains
Safety Trigger
Two-step safety trigger prevents accidental starting during handling
Chain Catcher
Built-in chain catcher reduces risk if chain breaks during operation
Vibration Reduction
Anti-vibration system reduces user fatigue during extended use
Lock-Off Button
Prevents accidental activation when chainsaw is not in use
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Chainsaw won't start | Power issue, safety lock engaged, trigger not pressed | Check power supply, disengage safety lock, press trigger fully |
| Chain won't move | Chain brake engaged, chain too tight, motor issue | Disengage chain brake, adjust chain tension, check motor |
| Chain doesn't oil | Empty oil reservoir, clogged oil ports, pump issue | Fill oil reservoir, clean oil ports, check oil pump |
| Poor cutting performance | Dull chain, improper chain tension, wrong cutting technique | Sharpen chain, adjust tension, use proper cutting angles |
| Excessive vibration | Loose components, unbalanced chain, worn sprocket | Tighten all components, balance chain, replace sprocket |
| Motor overheats | Dull chain, excessive pressure, ventilation blocked | Sharpen chain, let saw do the work, clear ventilation ports |
Maintenance Codes
- Oil Light Flashing: Low oil level - Refill bar and chain oil reservoir
- Motor Stuttering: Overload condition - Reduce cutting pressure
- Chain Slipping: Loose chain - Adjust chain tension immediately
- Excessive Smoke: Insufficient oiling - Check oil delivery system
- Erratic Cutting: Dull or damaged chain - Sharpen or replace chain
- No Power: Electrical issue - Check cord, outlet, and circuit breaker
Manual Downloads
Current Model Manuals
CMECS610
16-Inch Electric Chainsaw
CMECS612
16-Inch Brushless Chainsaw
CMECS614
16-Inch Pro Chainsaw
CMECS616
16-Inch Battery Chainsaw
Popular Previous Models
CMECS600
14-Inch Electric Chainsaw
CMECS518
18-Inch Electric Chainsaw
CMECS420
12-Inch Electric Chainsaw
CMECS316
16-Inch Corded Chainsaw