Installation Guide
Tools Needed:
- Adjustable wrench
- Screwdrivers (flat and Phillips)
- Socket set
- Safety gloves
- Safety glasses
Step-by-Step Assembly
- Unpack and Inspect: Remove all components from packaging and verify all parts are present and undamaged.
- Handle Assembly: Attach the lower handle to the main pole section using provided bolts and tighten securely.
- Chain Saw Head Attachment: Mount the chain saw head to the pole extension, ensuring all connections are tight and secure.
- Chain Installation: Install the cutting chain onto the guide bar, ensuring proper direction and tension.
- Fuel Mix Preparation: Prepare proper fuel mixture (50:1 ratio of unleaded gasoline to 2-cycle oil).
- Bar and Chain Oil: Fill the bar and chain oil reservoir with recommended lubricant.
- Final Inspection: Check all fasteners, controls, and safety features before first use.
Specifications
| Model Series | CMPS25CC |
| Type | Gas Powered Pole Saw |
| Engine Type | 2-Cycle Gasoline Engine |
| Engine Displacement | 25cc |
| Fuel Capacity | 12 oz (355 ml) |
| Bar Length | 10 inches |
| Chain Pitch | 0.325 inches |
| Maximum Reach | 12 feet |
| Weight | 14.5 lbs (6.6 kg) |
| Oil Capacity | 6.8 oz (200 ml) |
| Sound Power Level | 108 dB(A) |
| Vibration Level | 4.2 m/s² |
Warranty Information
- Full Warranty: 2 years limited warranty
- Engine Warranty: 5 years on engine components
- Additional Coverage: Optional extended protection plans available
For warranty service, contact Craftsman Customer Service at 1-888-331-4569 or visit Craftsman.com
Key Features
25cc 2-Cycle Engine
Powerful 25cc engine provides reliable performance for cutting branches up to 8 inches in diameter with consistent power output.
Adjustable Length Pole
Telescoping pole extends from 7 to 12 feet, allowing you to reach high branches without needing a ladder for most trimming tasks.
Automatic Oiler
Automatic chain lubrication system ensures consistent oil flow to the bar and chain, reducing friction and extending component life.
Lightweight Design
Weighing only 14.5 pounds, this pole saw reduces user fatigue while maintaining cutting power and reach capability.
Quick-Start Technology
Advanced ignition system and primer bulb make starting easier, even after extended storage periods.
Safety Features
Includes chain brake, throttle lockout, and rear hand guard for maximum operator protection during use.
Cutting Applications
Tree Pruning
Precision cutting for shaping trees and removing unwanted branches
Storm Cleanup
Effective for clearing fallen branches and debris after storms
Limb Removal
Safe removal of dead or dangerous limbs from standing trees
Property Maintenance
Regular maintenance of trees and shrubs around homes and properties
Right-of-Way Clearing
Clearing branches from power lines, fences, and property boundaries
Orchard Management
Pruning fruit trees and managing orchard growth patterns
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Engine won't start | Old fuel, clogged spark plug, improper choke setting | Use fresh fuel mix, clean/replace spark plug, check choke position |
| Engine starts then stalls | Clogged fuel filter, dirty air filter, carburetor issues | Replace fuel filter, clean air filter, adjust carburetor |
| Chain won't turn | Chain brake engaged, clutch issues, drive sprocket worn | Disengage chain brake, check clutch assembly, replace sprocket |
| Excessive vibration | Loose components, unbalanced chain, bent guide bar | Tighten all fasteners, balance chain, replace guide bar |
| Chain dulls quickly | Cutting dirty wood, improper tension, lack of lubrication | Avoid cutting ground-contact wood, adjust tension, check oiler |
| Oil leaking | Overfilled reservoir, damaged seals, loose fittings | Drain excess oil, replace seals, tighten connections |
Maintenance Codes
- Code 1: Daily maintenance required - Clean air filter, check chain tension
- Code 2: Weekly maintenance - Sharpen chain, clean spark arrestor
- Code 3: Monthly maintenance - Replace spark plug, clean carburetor
- Code 4: Seasonal maintenance - Replace fuel filter, inspect all components
- Code 5: Storage preparation - Drain fuel, oil chain, clean thoroughly
- Code 6: Professional service required - Contact authorized service center
Manual Downloads
Current Model Manuals
CMPS25CC
25cc Gas Pole Saw
CMPS30CC
30cc Extended Reach
CMPS25CCX
25cc Commercial Grade
CMPS20CC
20cc Lightweight Model
Popular Previous Models
CMPS22CC
22cc Pole Saw
CMPS26CC
26cc Professional
CMPS18CC
18cc Homeowner
CMPS28CC
28cc Heavy Duty