craftsman cmxgram201302 owners manual

User Manual & Installation Guide

CMXGRAM201302

Installation Guide

Tools Needed:

  • Adjustable wrench
  • Screwdrivers (flat and Phillips)
  • Pliers
  • Tape measure
  • Level

Step-by-Step Installation

  1. Choose Installation Location: Select a level, stable surface with proper ventilation and access to power outlet.
  2. Unpack and Inspect: Remove all packaging materials and inspect the unit for any shipping damage.
  3. Assemble Components: Follow the assembly instructions to attach any included accessories or parts.
  4. Power Connection: Connect to a properly grounded 120V, 60Hz outlet. Do not use extension cords.
  5. Initial Setup: Configure initial settings according to the quick start guide.
  6. Test Operation: Perform a test run to ensure proper functionality and identify any issues.
  7. Final Adjustments: Make any necessary adjustments to ensure optimal performance.
Warning: Installation should be performed by qualified personnel. Improper installation may void warranty and create safety hazards.

Specifications

Model Number CMXGRAM201302
Product Type Craftsman Garage Door Opener
Color White / Silver
Motor Type AC Motor
Horsepower 1/2 HP
Control Type Remote Control with Wall Console
Security Features Rolling Code Technology
Power Requirements 120V, 60Hz, 15A
Dimensions (HxWxD) 15 x 18 x 12 inches
Weight 25 lbs
Maximum Door Weight 350 lbs
Chain Type Steel Reinforced

Warranty Information

  • Full Warranty: 1 year parts and labor
  • Motor Warranty: 5 years on drive motor
  • Additional Coverage: Optional extended warranty available

For warranty service, contact Craftsman Customer Service at 1-888-331-4569 or visit Craftsman.com

Key Features

Quiet Operation

Advanced vibration reduction technology ensures smooth and quiet operation, minimizing noise during opening and closing cycles.

Security+ 2.0

Rolling code technology changes the access code each time the remote is used, preventing code grabbing and unauthorized access.

Soft Start/Stop

Gentle acceleration and deceleration reduces wear on components and provides smoother door operation.

Manual Release

Easy-to-use manual release allows operation during power outages or emergencies with minimal effort.

Auto-Reverse Safety

Infrared sensors automatically reverse the door if an obstruction is detected during closing for enhanced safety.

Battery Backup

Optional battery backup system ensures operation during power outages for continued access.

Control Features Explained

Remote Control

3-button remote with up to 150 ft range for convenient operation from vehicle

Wall Console

Backlit console with lock button, light control, and programming capabilities

Travel Limit Adjustment

Easy-to-adjust settings for precise door opening and closing positions

Force Adjustment

Adjustable force settings for proper operation with different door weights

Light Timer

Programmable light timer with adjustable duration from 1-30 minutes

Safety Sensors

Infrared beam sensors that detect obstructions and reverse door movement

Troubleshooting

Problem Possible Cause Solution
Door won't open/close Power issue, safety sensor obstruction Check power supply, ensure sensors are aligned and unobstructed
Remote not working Dead batteries, out of range, programming issue Replace batteries, check range, reprogram remote
Door reverses when closing Obstruction detected, force setting too low Clear obstruction, adjust force settings
Noisy operation Loose hardware, worn components Tighten all hardware, inspect and replace worn parts
Light not working Bulb burned out, light timer setting Replace bulb, check light timer settings
Door doesn't close completely Travel limits misadjusted, obstruction Adjust travel limits, check for obstructions

Error Codes

  • 1 Flash: Travel limits need adjustment - Adjust open/close limits
  • 2 Flashes: Force limits need adjustment - Adjust force settings
  • 3 Flashes: Safety sensor issue - Check sensor alignment and wiring
  • 4 Flashes: Motor overload - Check for obstructions and proper lubrication
  • 5 Flashes: Control board error - Reset unit or contact service
  • Continuous Flash: General error - Reset power and check connections

Manual Downloads

Current Model Manuals

CMXGRAM201302

1/2 HP Garage Door Opener

CMXGRAM201402

3/4 HP Garage Door Opener

CMXGRAM201502

1 HP Smart Garage Door Opener

CMXGRAM201602

1/2 HP Belt Drive Opener

Popular Previous Models

CMXGRAM101302

1/2 HP Chain Drive

CMXGRAM091302

1/3 HP Standard Opener

CMXGRAM081302

1/2 HP Screw Drive

CMXGRAM071302

3/4 HP Commercial Opener

Note: For models not listed here, please visit the Craftsman Support Website for complete documentation.