Craftsman T200 and T300 Parts Manuals

The Craftsman T200 and T300 series are popular riding lawn mowers known for their reliability and performance. These parts manuals provide comprehensive diagrams, part numbers, and ordering information for all components of the T200 and T300 models, including the engine, deck, transmission, electrical system, and chassis. Below are key sections for identification, engine parts, deck assembly, drive system, electrical components, maintenance, and ordering.

1. Model Identification 2. Engine Components 3. Cutting Deck Assembly 4. Drive System & Transmission 5. Electrical System Parts 6. Chassis & Controls 7. Maintenance Parts 8. Fasteners & Hardware 9. Safety Information 10. Parts Ordering Guide 11. Troubleshooting Parts Issues

Model Identification

Locate your model and serial number to ensure correct parts ordering. Key identifiers: Model plate on frame under seat or near engine.

Model Series	Description
T200	42-inch Deck, 19.5 HP Engine, Automatic Transmission
T300	46-inch Deck, 22 HP Engine, Hydrostatic Drive
Serial Number	Located on model plate; required for parts lookup
Manufacture Date	Year/week code on plate
Engine Model	Briggs & Stratton or Kohler engine specifics

Engine Components

Parts for Briggs & Stratton or Kohler engines used in T200/T300.

Air Filter: Replaceable element; part # varies by engine model.
Spark Plug: Champion RC12YC or equivalent.
Oil Filter: Cartridge type; check engine manual.
Fuel Pump: Diaphragm assembly for fuel delivery.
Carburetor Kit: Includes gaskets, needles for overhaul.
Starter Motor: Electric starter assembly.

WARNING! Disconnect spark plug before servicing engine. Use genuine parts for compatibility.

Cutting Deck Assembly

42-inch (T200) or 46-inch (T300) deck parts.

Blades: High-lift mulching blades; part # by deck size.
Spindle Assembly: Includes bearing, housing, pulley.
Deck Belt: V-belt for blade drive; length specific to model.
Deck Wheels: Anti-scalp rollers and brackets.
Deck Shell: Reinformed steel housing.
Belt Idlers: Tensioner pulleys and springs.

CAUTION! Ensure deck is securely supported during service; blades are sharp.

Drive System & Transmission

Transmission: T200: Automatic; T300: Hydrostatic.
Drive Belt: Link belt for transmission to engine.
Axle: Rear axle assembly with hubs.
Brakes: Disc or drum brake pads/cables.
Pulleys: Engine drive pulley, transmission input pulley.
Hydrostatic Parts: T300 only: fluid, filters, control linkages.

Electrical System Parts

Battery, wiring, switches, sensors.

Key Components: Battery (12V, 230 CCA), Starter Solenoid, Ignition Switch, Safety Switches (seat, blade engage), Wiring Harness, Fuses (20A), Headlight Assembly.

Diagram: Refer to wiring schematic in manual for color codes and connections. Testing: Use multimeter for continuity checks. Replacement: Match part numbers exactly; incorrect wiring can cause shorts.

Chassis & Controls

Frame, steering, seat, control linkages.

Turn off engine and remove key before servicing.
Steering Wheel: Tilt steering assembly with column.
Seat: Padded seat with mounting brackets.
Control Cables: Throttle, choke, blade engage.
Foot Pedals: Brake and speed control (T300).

Tip: Lubricate control linkages periodically for smooth operation.

Maintenance Parts

Filters, fluids, wear items.

Oil: SAE 30 or 10W-30 (check manual).
Air Filter: Paper or foam element.
Fuel Filter: In-line filter; replace annually.
Grease: Lithium-based for fittings.
Tires: Front (15x6.00-6) and rear (20x10.00-8).
Battery: Maintain with charger; check terminals.

WARNING! Dispose of fluids properly; avoid environmental contamination.

Fasteners & Hardware

Bolts, nuts, clips, pins specific to model.

Kit includes: Deck bolts (3/8-16 x 1"), Blade bolts (1/2-20), Hitch pins, Retaining clips, Spacers. Use torque specs: Blade bolts 40-50 ft-lbs; deck bolts 25-35 ft-lbs.

Safety Information

Always follow safety guidelines when replacing parts. Disconnect battery and spark plug. Use jack stands for support. Wear safety glasses and gloves.

CAUTION! Do not operate with damaged or incorrect parts; can lead to injury or machine failure.

Parts Ordering Guide

Use model and serial number to order. Contact Craftsman dealer or online at www.craftsman.com. Have part numbers ready from diagrams.

Warranty: Genuine parts covered by limited warranty. Returns: Unused parts in original packaging within 30 days. Shipping: Allow 5-7 business days for delivery.

Troubleshooting Parts Issues

Symptom	Possible Cause	Corrective Action
Part doesn't fit	Wrong model/year	Verify model/serial; order correct part number.
Vibration after blade change	Unbalanced blade or incorrect torque	Balance blade; torque to 40-50 ft-lbs.
Deck belt slips	Worn belt or misaligned pulley	Replace belt; check pulley alignment.
Engine won't start after service	Disconnected safety switch or wiring	Check all connections; ensure switches engaged.
Hydrostatic drive sluggish	Low fluid or old filter	Check fluid level; replace filter.

Support: 1-888-331-4569; www.craftsman.com