Craftsman T2200 Owner's Manual

The Craftsman T2200 is a versatile lawn tractor designed for residential use, featuring a powerful engine, hydrostatic transmission, durable cutting deck, ergonomic controls, and multiple attachments for year-round yard maintenance. Below are key sections covering safety, operation, maintenance, specifications, and troubleshooting.

Features at a Glance

Key components: Engine, Hydrostatic Transmission, Cutting Deck, Steering Wheel, Seat, Control Panel, Fuel Tank, Battery.

Assembly & Setup

Unpack and inspect all parts. Assemble on a flat, stable surface.

1. Install steering wheel: Align and secure with provided hardware.
2. Attach seat: Mount seat bracket and secure with bolts.
3. Connect battery: Attach cables (red positive, black negative).
4. Install cutting deck: Align with attachment points and secure.
5. Add fluids: Fill engine oil and fuel tank as specified.

WARNING! Tractor is heavy; use assistance during assembly. Ensure all bolts are tightened to specification.

Controls & Operation

Familiarize yourself with controls before operation.

1. Starting: Engage parking brake, set throttle to mid-range, turn key to start.
2. Driving: Release parking brake, use hydrostatic pedal for speed/direction.
3. Mowing: Engage PTO lever to activate cutting blades.
4. Stopping: Disengage PTO, set parking brake, turn key to off.
5. Height adjustment: Use lever to raise/lower cutting deck.

CAUTION! Always operate on stable ground; avoid slopes exceeding 15 degrees.

Specifications

• Engine: 20 HP OHV gasoline engine.
• Transmission: Hydrostatic, single-speed range.
• Cutting Width: 42 inches (standard deck).
• Cutting Height: 1.5 to 4 inches adjustable.
• Fuel Capacity: 3 gallons.
• Turning Radius: 18 inches.
• Weight: 450 lbs (without attachments).
• Battery: 12V, 280 CCA.
• Tires: Front 15x6.00-6, Rear 20x10.00-8.

Attachments & Accessories

Compatible with Craftsman quick-attach system.

Available Attachments: Mulching kit, Bagging system, Snow blade, Towing cart, Aerator.

1. Ensure tractor is off and parking brake engaged.
2. Align attachment with mounting points.
3. Secure with pins or bolts as instructed.
4. Test attachment operation at low speed first.

Tip: Refer to individual attachment manuals for specific instructions.

Maintenance Schedule

Regular maintenance ensures longevity and performance.

1. Before each use: Check tire pressure, fluid levels, and for loose parts.
2. Every 25 hours: Change engine oil, check air filter.
3. Every 50 hours: Replace spark plug, inspect blades.
4. Every 100 hours: Change transmission fluid, lubricate fittings.
5. Seasonally: Sharpen blades, check battery charge.

WARNING! Always disconnect spark plug before performing maintenance.

Storage & Winterization

Prepare tractor for long-term storage.

1. Clean thoroughly: Remove grass, dirt, and debris.
2. Fuel: Add stabilizer or drain fuel system.
3. Battery: Disconnect and store in cool, dry place.
4. Lubricate: Apply grease to moving parts.
5. Store: Keep in dry, covered area; elevate if possible.

CAUTION! Never store with fuel in tank without stabilizer.

Safety Guidelines

Always follow safety procedures to prevent injury.

• Wear appropriate clothing: Closed-toe shoes, eye protection.
• Clear area: Remove debris, toys, and obstacles before mowing.
• No passengers: Only operator on seat during operation.
• Slope operation: Mow up and down slopes, not across.
• Shut off: Disengage blades and turn off engine when unattended.

DANGER! Keep hands and feet away from moving parts.

Warranty Information

Craftsman T2200 includes limited warranty covering defects in materials/workmanship. Residential use: 2 years on tractor, 3 years on deck. Commercial use: 90 days. Proof of purchase required. For claims, contact Craftsman Customer Service at 1-888-331-4569 or visit www.craftsman.com.

Troubleshooting

Reset: Disconnect battery for 5 minutes to reset electrical system if needed.

Service: 1-888-331-4569; www.craftsman.com