Craftsman T2400 Lawn Tractor Manual

The Craftsman T2400 is a 24-horsepower lawn tractor featuring a Briggs & Stratton engine, 46-inch cutting deck, hydrostatic transmission, electric PTO engagement, cruise control, cup holder, and ergonomic high-back seat. Designed for residential lawn care, it offers ease of operation, durability, and multiple cutting height adjustments. Below are key sections for safety, features, operation, maintenance, troubleshooting, and specifications.

1. Features at a Glance 2. Assembly & Setup 3. Controls and Operation 4. Specifications 5. Maintenance Schedule 6. Cutting Deck Operation 7. Storage & Winterization 8. Safety Information 9. Warranty Information 10. Troubleshooting

Features at a Glance

Key components: 24 HP Briggs & Stratton engine, 46-inch stamped steel cutting deck, hydrostatic transmission, electric PTO, cruise control, cup holder, headlights, and ergonomic seat.

Feature	Description
Engine	24 HP Briggs & Stratton, single-cylinder, overhead valve
Cutting Deck	46-inch stamped steel, 3-blade system
Transmission	Hydrostatic, infinite forward/reverse speeds
PTO Engagement	Electric clutch, dash-mounted switch
Cutting Height	Adjustable 1.5 to 4 inches (13 positions)
Fuel Capacity	3 gallons (unleaded gasoline)
Seat	High-back, adjustable, ergonomic design
Headlights	Two front headlights for low-light operation
Cup Holder	Integrated cup holder on dash panel
Drive System	Rear-wheel drive with differential lock

Assembly & Setup

Unpack and inspect contents. Assembly requires basic tools.

Install steering wheel: Align and tighten bolt.
Attach seat: Mount using provided bolts and washers.
Install battery: Connect red (+) then black (-) terminals.
Add engine oil: Use SAE 30 (check manual for capacity).
Add fuel: Use fresh unleaded gasoline (87 octane minimum).
Check tire pressure: Inflate to 14 PSI (front) and 10 PSI (rear).

WARNING! Always disconnect spark plug wire before performing any assembly or maintenance.

Controls and Operation

Familiarize yourself with controls before operation.

Ignition switch: Turn key to start engine.
Throttle control: Set to FAST for mowing, SLOW for idle.
Choke: Use when starting cold engine.
Blade engagement: Pull PTO switch upward to engage blades.
Hydrostatic drive: Press forward pedal to go forward, reverse pedal to go backward.
Parking brake: Engage before dismounting.
Cruise control: Set speed with switch on dash.

CAUTION! Keep hands and feet away from moving parts. Do not mow on slopes greater than 15 degrees.

Specifications

Engine: 24 HP Briggs & Stratton, OHV, air-cooled.
Cutting Width: 46 inches.
Transmission: Hydrostatic, infinite speeds.
Fuel Type: Unleaded gasoline (87 octane minimum).
Oil Capacity: 2 quarts (SAE 30).
Cutting Height Range: 1.5 to 4 inches.
Tire Size: Front 15x6.00-6, Rear 20x10.00-8.
Weight: 500 lbs (approximate).
Warranty: 2-year limited warranty.

Maintenance Schedule

Regular maintenance ensures long life and optimal performance.

Interval	Task
Before each use	Check engine oil level, tire pressure, fuel level
Every 8 hours	Check cutting deck for debris, inspect blades
Every 50 hours	Change engine oil, replace oil filter
Every 100 hours	Replace air filter, spark plug
Every season	Sharpen blades, lubricate pivot points
Annually	Change transmission fluid, inspect belts

Tip: Always refer to engine manual for specific engine maintenance.

Cutting Deck Operation

The 46-inch cutting deck provides even cutting performance.

Height adjustment: Use lever to select cutting height (1.5 to 4 inches).
Blade engagement: Engage PTO only at full throttle.
Mowing patterns: Overlap each pass by 2-3 inches for even cut.
Discharge: Side discharge standard; optional mulching kit available.
Deck leveling: Adjust deck level for even cut (see manual for procedure).

WARNING! Always shut off engine and remove key before adjusting deck or blades.

Storage & Winterization

Proper storage prevents damage during off-season.

Fuel system: Add fuel stabilizer or drain tank completely.
Oil: Change oil before storage.
Battery: Remove and store in cool, dry place; charge monthly.
Cleaning: Clean deck and underside thoroughly.
Storage location: Store in dry, covered area.

CAUTION! Never store tractor with fuel in tank without stabilizer.

Safety Information

Always follow safety guidelines to prevent injury.

Read manual completely before operation.
Never allow children to operate tractor.
Wear safety glasses, long pants, and sturdy shoes.
Clear mowing area of debris before mowing.
Do not mow on wet grass or steep slopes.
Disengage blades when not mowing.
Always look behind before backing up.

DANGER! Keep hands and feet away from rotating blades. Blades can cause serious injury.

Warranty Information

Craftsman T2400 includes 2-year limited warranty covering defects in materials and workmanship. Warranty does not cover normal wear, misuse, or improper maintenance. For warranty service, contact authorized service center with proof of purchase. Keep receipt for warranty validation.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Engine won't start	Dead battery, empty fuel tank, clogged fuel filter	Charge battery, add fuel, replace fuel filter
Poor cutting performance	Dull blades, low engine speed, clogged deck	Sharpen blades, run at full throttle, clean deck
Excessive vibration	Unbalanced blade, loose blade bolt	Balance or replace blade, tighten bolt
Loss of power	Dirty air filter, old spark plug	Clean/replace air filter, replace spark plug
Hydrostatic transmission issues	Low fluid, air in system	Check fluid level, bleed system per manual

Service: For technical support, call 1-888-331-4569 or visit www.craftsman.com.