Installation Guide
Tools Needed:
- Adjustable wrench set
- Screwdrivers (flat and Phillips)
- Allen key set
- Torque wrench
- Safety glasses
Step-by-Step Installation
- Workspace Preparation: Clear a clean, well-lit area with adequate ventilation for tool setup and operation.
- Unpacking: Carefully remove all packaging materials and verify all components are present using the parts list.
- Assembly: Follow the specific assembly instructions for your Craftsman tool model, ensuring all bolts are properly tightened.
- Power Connection: Connect to appropriate power source (120V/240V as specified) with proper grounding. Use only recommended extension cords.
- Safety Setup: Install all safety guards and devices before operation. Verify emergency stop functions.
- Calibration: Perform initial calibration and alignment according to manufacturer specifications.
- Test Operation: Run the tool without load to verify proper operation and identify any unusual noises or vibrations.
Specifications
| Brand | Craftsman |
| Tool Type | Professional Power Tools |
| Series | V20 / Professional / Evolv |
| Power Source | Corded / Cordless (Battery) |
| Voltage Range | 120V AC / 20V MAX Lithium-Ion |
| Noise Level | 70-85 dB (varies by tool) |
| Control Type | Variable Speed / Electronic Brake |
| Safety Rating | UL Certified / ETL Listed |
| Weight Range | 2.5 - 15 lbs (varies by tool) |
| Dimensions | Varies by tool model |
| Charger Type | Fast Charger (Cordless Models) |
| Battery Capacity | 2.0Ah / 4.0Ah / 6.0Ah Options |
Warranty Information
- Full Warranty: 3 years limited warranty
- Battery Warranty: 3 years on Lithium-Ion batteries
- Motor Warranty: Lifetime warranty on brushless motors
- Additional Coverage: 90-day satisfaction guarantee
For warranty service, contact Craftsman Customer Service at 1-888-331-4569 or visit Craftsman.com
Key Features
Brushless Motor Technology
Craftsman's brushless motors deliver more power, longer runtime, and extended tool life compared to traditional brushed motors.
V20 Lithium-Ion System
The 20V MAX battery platform provides cordless freedom with consistent power output and compatibility across 100+ tools.
Advanced Ergonomics
Tools are designed with comfort-grip handles, balanced weight distribution, and reduced vibration for extended use without fatigue.
Smart Technology
Select models feature Bluetooth connectivity for tool tracking, maintenance alerts, and theft prevention through the Craftsman app.
Durability Construction
All-metal gear housings, industrial-grade bearings, and reinforced components ensure professional-grade durability.
Safety Systems
Integrated safety features include electronic brakes, kickback control, and automatic shutoff for user protection.
Tool Technology Explained
Brushless Power
Efficient motor design that eliminates friction points for longer life and more power
Battery Management
Intelligent battery monitoring prevents overcharging and overheating
Variable Speed Control
Precise speed adjustment for different materials and applications
Vibration Reduction
Advanced dampening systems minimize user fatigue during extended use
Quick-Change Systems
Tool-free bit changes and accessory swaps for increased productivity
LED Work Lights
Integrated lighting illuminates work areas in low-light conditions
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Tool won't start | Dead battery, power switch failure, thermal cutoff | Charge battery, check power switch, allow tool to cool |
| Reduced power output | Weak battery, brush wear, motor issues | Replace battery, check brushes, inspect motor |
| Overheating | Overloading, blocked vents, continuous use | Reduce load, clear ventilation, allow cooling periods |
| Unusual noises | Worn bearings, loose components, gear damage | Inspect bearings, tighten components, check gears |
| Battery not charging | Faulty charger, battery failure, connection issues | Test charger, replace battery, clean contacts |
| Excessive vibration | Unbalanced accessory, bent shaft, worn parts | Check accessory balance, inspect shaft, replace worn parts |
Error Indicators
- Red Flashing Light: Overheating - Allow tool to cool completely
- Yellow Flashing Light: Battery protection - Replace or charge battery
- Green/Red Alternating: Charger error - Check connections and power source
- Continuous Beep: Overload protection - Reduce load on tool
- Double Beep: Thermal cutoff - Tool has overheated and shut down
- No Power: Electronic failure - Contact service center
Manual Downloads
Current Model Manuals
CMCD700
1/2" Brushless Drill/Driver
CMCB202
20V Circular Saw
CMCS300
7-1/4" Miter Saw
CMCF800
20V Impact Wrench
Popular Previous Models
CMCD720
20V Drill/Driver Kit
CMCS500
10" Compound Miter Saw
CMCE100
Orbital Sander
CMCF900
1/2" Impact Wrench