Craftsman V20 Trimmer

User Manual & Installation Guide

V20 Cordless String Trimmer

Installation Guide

Tools Needed:

  • Allen wrench (included)
  • Phillips screwdriver
  • Safety gloves
  • Safety glasses

Step-by-Step Assembly

  1. Unpack Components: Remove all parts from packaging including trimmer head, shaft, handle, and battery.
  2. Attach Shaft Sections: Connect upper and lower shaft sections by aligning arrows and twisting until they click into place.
  3. Install Handle: Slide handle onto shaft at desired height and tighten using provided screws and Allen wrench.
  4. Install Trimmer Head: Align trimmer head with shaft end and rotate clockwise until securely fastened.
  5. Load Trimmer Line: Follow instructions to load .080" diameter trimmer line into spool head.
  6. Install Battery: Insert fully charged V20 battery into battery compartment until it clicks.
  7. Safety Check: Ensure all connections are secure and guards are properly installed before first use.
Warning: Always wear appropriate safety equipment including eye protection, gloves, long pants, and closed-toe shoes when operating trimmer.

Specifications

Model Number CMCV200
Type Cordless String Trimmer
Power Source 20V MAX Lithium-Ion Battery
Cutting Swath 13 inches
Line Diameter 0.080 inches
Noise Level 78 dB
Weight (without battery) 7.5 lbs
Shaft Type Straight Shaft
Battery Runtime Up to 45 minutes per charge
Charging Time 60 minutes
Handle Type Adjustable Auxiliary Handle
Warranty 3 Years Limited

Warranty Information

  • Full Warranty: 3 years limited warranty
  • Battery Warranty: 2 years on V20 Lithium-Ion Battery
  • Charger Warranty: 2 years on battery charger

For warranty service, contact Craftsman Customer Service at 1-888-331-4569 or visit Craftsman.com

Key Features

20V MAX Power

Delivers gas-like power without the hassle of gas, oil, or pull cords. Provides consistent power for trimming tough weeds and grass.

Dual Line Feed

Automatic feed system advances trimmer line with a simple tap of the head on the ground, ensuring continuous cutting performance.

Variable Speed Trigger

Allows precise control over cutting speed for different vegetation types, from delicate edging to heavy weed clearing.

Lightweight Design

Ergonomic design with balanced weight distribution reduces user fatigue during extended trimming sessions.

Tool-Free Conversion

Quickly converts from trimming to edging with simple adjustments, no tools required for changing modes.

Battery Compatibility

Uses the Craftsman V20 battery platform that works with over 75+ tools, providing versatility and value.

Cutting Modes Explained

Standard Trimming

Ideal for routine lawn maintenance and grass trimming along fences and borders

Edging Mode

Converts trimmer to edger for creating clean lines along sidewalks and driveways

Heavy Duty

Maximum power setting for tackling thick weeds and overgrown vegetation

Precision Mode

Lower speed setting for delicate trimming around flowers and garden beds

Troubleshooting

Problem Possible Cause Solution
Trimmer won't start Dead battery, safety lock not engaged Charge battery, ensure safety lock is properly engaged
Line not feeding Empty spool, tangled line, worn bump head Reload trimmer line, clean spool area, replace bump head if worn
Reduced runtime Old battery, heavy vegetation, extreme temperatures Replace battery if old, work in sections, avoid temperature extremes
Excessive vibration Bent shaft, unbalanced head, loose components Check shaft alignment, balance trimmer head, tighten all connections
Motor overheating Continuous heavy use, blocked ventilation Allow motor to cool, clear ventilation ports, use appropriate speed
Uneven cutting Worn line, incorrect line length, improper technique Replace line, adjust to proper length, maintain consistent angle

Maintenance Codes & Indicators

  • Red Battery Light: Low battery - Charge immediately
  • Flashing Power Light: Overheating - Allow tool to cool
  • No Power: Check battery connection and charge
  • Weak Cutting: Replace trimmer line or spool
  • Strange Noise: Check for debris in head or motor
  • Battery Not Charging: Check charger connection and outlet

Manual Downloads

Current Model Manuals

CMCV200

V20 13" String Trimmer

CMCV201

V20 Trimmer/Edger Combo

CMCV202

V20 Brushless Trimmer

CMCV203

V20 Power Head Trimmer

Popular Previous Models

CMCES100

15" Gas Trimmer

CMCES200

17" 2-Cycle Trimmer

CMCES300

Curved Shaft Trimmer

CMCES400

4-Cycle Trimmer

Note: For models not listed here, please visit the Craftsman Support Website for complete documentation.