Installation Guide
Tools Needed:
- Craftsman Screwdriver Set
- Adjustable Wrench
- Power Drill
- Level
- Safety Glasses
Step-by-Step Installation
- Safety First: Always wear appropriate safety gear including eye protection and gloves when installing tools.
- Workspace Preparation: Ensure you have a clean, well-lit area with adequate ventilation for tool installation.
- Unpacking: Carefully remove all components from packaging and verify all parts are present using the parts list.
- Assembly: Follow the specific assembly instructions for your Craftsman tool model, tightening all fasteners securely.
- Power Connection: For power tools, connect to appropriate voltage outlet and ensure proper grounding.
- Calibration: Calibrate tools according to manufacturer specifications for optimal performance.
- Test Operation: Perform a test run without load to ensure proper installation and operation.
Specifications
| Brand | Craftsman |
| Tool Type | Power & Hand Tools |
| Warranty | Lifetime (Hand Tools), 1-3 Years (Power Tools) |
| Voltage Requirements | 120V (US), 220-240V (International) |
| Battery Type | Lithium-Ion (C3 Battery System) |
| Charger Type | Fast Charger (30-60 min charge time) |
| Safety Standards | UL, CSA, ETL Certified |
| Weight Range | 2-25 lbs (varies by tool) |
| Material | Steel, Aluminum, High-Grade Plastics |
| Country of Origin | USA & International |
Warranty Information
- Hand Tools: Full lifetime warranty
- Power Tools: 1-3 years depending on model
- Batteries & Chargers: 1 year warranty
- Additional Coverage: Extended warranty available at purchase
For warranty service, contact Craftsman Customer Service at 1-888-331-4569 or visit Craftsman.com
Key Features
C3 Battery System
Interchangeable lithium-ion battery system that works across multiple Craftsman power tools, providing consistent power and longer run times.
Laser Guide Technology
Precision laser guides on saws and drills ensure accurate cuts and holes every time, improving project quality and reducing material waste.
Anti-Vibration Handle
Reduces user fatigue during extended use by minimizing vibration transfer, providing better control and comfort.
Quick-Change Chuck
Allows for fast bit changes without additional tools, saving time and increasing productivity on job sites.
LED Work Lights
Integrated LED lights illuminate work areas in low-light conditions, improving visibility and safety.
Overload Protection
Automatic shut-off prevents motor damage during high-load situations, extending tool life and protecting your investment.
Tool Categories Explained
Drills & Drivers
Corded and cordless models with variable speed control and multiple torque settings
Saws
Circular, jig, reciprocating, and miter saws with precision cutting capabilities
Wrenches & Sockets
Complete sets with lifetime warranty and corrosion-resistant finish
Measuring Tools
Tapes, levels, and lasers with accuracy guarantees and durable construction
Garden Tools
Trimmers, mowers, and blowers with powerful motors and ergonomic designs
Storage Solutions
Tool boxes, chests, and organizers with secure locking mechanisms
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Tool won't start | Dead battery, faulty switch, power cord issue | Charge battery, check switch, inspect power cord |
| Reduced power output | Worn brushes, battery degradation, overload | Replace brushes, charge battery, reduce load |
| Overheating | Continuous use, blocked vents, dull blade | Allow to cool, clean vents, sharpen/replace blade |
| Excessive vibration | Unbalanced blade, loose components, worn bearings | Balance blade, tighten components, replace bearings |
| Battery not charging | Faulty charger, dirty contacts, battery failure | Test charger, clean contacts, replace battery |
| Inaccurate measurements | Calibration issue, worn components, user error | Recalibrate tool, replace worn parts, review manual |
Common Error Indicators
- Red Light Flashing: Overheating - Allow tool to cool before resuming use
- No Power: Check battery charge, power source, and connections
- Irregular Operation: May indicate brush wear or motor issues
- Smoke/Odor: Immediately stop use and unplug - Contact service
- Unusual Noise: Check for loose parts or foreign objects
- Poor Performance: May need blade sharpening or part replacement
Manual Downloads
Popular Power Tools
CMCD700
20V Drill/Driver Kit
CMLS100
Laser Level System
CMCS300
Circular Saw
CMCF800
Impact Wrench
Hand Tools & Sets
9-44811
Mechanics Tool Set
CMHT68129
Socket Set
CMHT42446
Wrench Set
CMHT80365
Screwdriver Set
Outdoor Power Equipment
CMCG200
Chainsaw
CMST200
String Trimmer
CMLT100
Leaf Blower
CMMP100
Pressure Washer